PCI Elefil Process Filters

It is very important for an electrolyte to be free from dust and other fine almost invisible particles. These particles interfere in the performance of the bath solution and should be removed through proper filtration. PCI Elefil process filters are designed in such a manner that traps fine dirt and dust particles from the plating solutions and ensures that the solution is clean at all the times. PCI Elefil process ensures cleanliness in the deposition of high quality finishes and avoids the roughness which occurs every time any particles that had settled to the bottom of the tank were stirred up. By efficient continuous filtration, using newer methods and medias, most particles are removed before they have any chance to cause problems.

PCI Elefil Process Filters are manufactured in both disc type and cartridge type as per the specific requirements and the range of capacities available will meet the majority of automatic and manual plating installation requirements. PCI Elefil filter units provide a large filtration area, are easy to clean and maintain, and provide effective retention of activated carbon or filter aids.The unit is available in different number and sizes of pure polypropylene plates. The dome type Elefil filter is available in MS (with PVC/Rubber lining) or electropolished SS 316 (with or without lining) installed on a trolley complete with polypropylene plates, filter cloth, motor, pumps and with two 3 meter (10ft.) lengths of reinforced acid resistant hose including appropriate spigots.

PCI Elefil Filters are used on the majority of electroplating solutions which includes:

  • BRIGHT NICKEL, SEMI BRIGHT NICKEL, DULL NICKEL
  • CYANIDE ZINC, ACID ZINC, ALKALINE ZINC
  • CYANIDE COPPER
  • ACID TIN, STANNATE TIN.