Acid Chloride Zinc Plating

ACID ZINC BRIGHTENER ZINCOSHEEN 772 M/R      Download TDS

Application

ZINCOSHEEN 772 is a two part highly versatile Acid Zinc Brightner and Maintenance, manufactured for the first time in India with the most modern techniques and formulations, which outdates all the existing Acid Chloride Zinc Brightners in the market. It does not oil- out as other brightner systems, and works at wider temperature range from below 16o C to 90o C, and the bath never gets imbalanced because of Brightner and never requires an extra addition of Maintenance Brightner at any point. ZINCOSHEEN 772 provides excellent and quick Brightness as compared to others and is totally trouble free while plating the parts. It provides scratch free, high degree of extra Levelling, Ductility, imparting high lustrous finish and will plate directly on carbonitrided and malleable Iron. Has an exceptional, high speed deposition rate, covering LCD areas uniformily. The grains deposited are so fine that it gives a lustrous glaze at all times. Deposits are very active and very suitable for subsequent post treatment. Chromate Conversion Coatings on this finish gives an extra adhesion and decorative colours.

Operating Conditions
  • ZINCOBRITE AZ 780 A 80 - 125 ml./ ltr
  • ZINCOBRITE AZ 780 B 200 - 250 gms/ ltr
  • BRIGHTNER 772 ‘R’ 0.3 - 0.6 cc/ ltr
  • MAINTENANCE 772 ’M’ 20 - 30 cc/lt
  • Temperature 20 - 40oC

 

ACID ZINC BRIGHTENER ZINCOSHEEN RM 345

ZINCOSHEEN RM 345 is a highly versatile Single Zinc Brightener, manufactured for the first time in India with the most modern techniques and formulations, which outdates all the existing Acid Chloride Zinc Brighteners in the market. It does not requires an Extra Maintainance Additive ‘M’ as it works singly, hence very economical to use. It does not oil- out as other brightener systems, therefore works at wider temperature range from below 160 C to more than 700C, and the bath never gets imbalanced because of Brightener and never requires the addition of maintainance Brightener ‘M’ at any point

Application

ZINCOSHEEN RM 345 provides excellent and quick Brightness as compared to others and is totally trouble free while plating the parts. It provides scratch free, high degree of extra Levelling, Ductility, imparting high lustrous finish and will plate directly on carbonitrided and malleable Iron.. Has an exceptional, high speed deposition rate, covering LCD areas uniformily. The grains deposited are so fine that it gives a lustrous glaze at all times. Deposits are very active and very suitable for subsequent post treatment. Chromate Conversion Coatings on this finish gives an extra adhesion and decorative colours.

Operating Conditions
  • ZINCOBRITE AZ 780 A 80 - 125 ml./ ltr
  • ZINCOBRITE AZ 780 B 200 - 250 gms/ ltr
  • ZINCOSHEEN RM345 0.4 - 0.8 cc/ ltr
  • Temperature 50 - 60o C

 

ACID ZINC BRIGHTENER ZINCOTEK 1525 M / R

ZINCOTEK 1525 is a twin system comprising a Brightener and a Maintenance Additive. This process is employed where economy of use is considered. This process also does not oil out and gives exceptional deposition rate with sharp brightness and levelling

ZINCOSALT AZ 780A / B

Application

A liquid and powdered Zinc Salt which provides the appropriate and pure form of Zinc Metal, Chloride and other salts to give trouble and haze free Zinc deposits in Acid based Zinc Plating system.